Maintenance Schedule for LitePOWER 200KW Generator
(in normal environments)
|
HOURS
|
| Engine Oil |
200 hours |
| Engine Oil Filter |
200 hours |
| Fuel Filter |
400 hours |
| Water Separator |
400 hours |
| In Line Fuel Filter |
400 hours |
| Air Filter Elements (2) |
600 hours |
| Radiators clean |
Annually |
|
| Normal
environments refer to operation of the generator in normal conditions.
Air quality, fuel quality, temperature and load all affect service
frequency. Airborne containments will affect the air filter and
radiator service requirements. Poor fuel, either from the source
or due to storage, will affect the fuel filters. Load, either
excessive or minimal, will affect the lube oil requirements.
Inspection and testing are extremely important. If you have a
question about performance, test unit with a load-bank. |
|
PART NUMBERS
|
| Engine Oil - Delo 15W40 or Rotella T 15W40 |
| Engine Oil Filter - Fleetguard LF9009 |
| Engine Water Pump/Alternator Belt - Cummins |
| Water Separator before lift pump Fleetguard
FS1242 |
| Water Separator after lift pump - Fleetguard
FS1280 or Napa 3357 or AC T1068 |
| Fuel Filter after lift pump - Fleetguard FS1221 |
| Air Filter, Main - Nelson 70063N |
| Air Filter, Safety - Nelson 70269N |
Coolant filters. Select using Cummins Test Kit.
WF2077 Corrosion resistor no DCA (dry
chemical additives)
WF2070 Corrosion resistor
2 DCA units
WF2071 Corrosion resistor
4 DCA units
Note: Coolant system volume
12.9 US gallons (49 liters) |
| Belt, Blower - All - Fenner Power Twist A Belt |
LitePOWER Main Menu